C-Tec

C-Tec CAST input output module

SKU: XN01-CA730 In stock

See your price Enquire now

Key features

LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13.

Incorporates the functions of a switch monitor, zone monitor and output unit.

Can be configured to monitor any combination of:-

Up to 20 conventional detectors & 10 MCPs

Any normally open switch with an EOL resistor fitted.

A simple normally open or closed switch (non-fault monitored).

Onboard short-circuit loop isolator.

5.5mA typical alarm current (1.3mA typical quiescent current) @ 22-40V DC.

Indicators for Loop polling, input faults and relay status.

Can switch 1A@30V DC (or 0.3A@125V AC)

Includes volt free changeover contacts that can be used to trigger rollershutter doors, gas shut-off valves, smoke vents, etc.

Mountable on a C-TEC NCP-26 surface box or a standard UK 25mm double gang back box (not supplied).

Show all product specifications Show Less

Delivery in 1-2 days (Ireland)

30 days Exchange or Refund

Product specifications Print

LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13.
Incorporates the functions of a switch monitor, zone monitor and output unit.
Can be configured to monitor any combination of:-
Up to 20 conventional detectors & 10 MCPs
Any normally open switch with an EOL resistor fitted.
A simple normally open or closed switch (non-fault monitored).
Onboard short-circuit loop isolator.
5.5mA typical alarm current (1.3mA typical quiescent current) @ 22-40V DC.
Indicators for Loop polling, input faults and relay status.
Can switch 1A@30V DC (or 0.3A@125V AC)
Includes volt free changeover contacts that can be used to trigger rollershutter doors, gas shut-off valves, smoke vents, etc.
Mountable on a C-TEC NCP-26 surface box or a standard UK 25mm double gang back box (not supplied).